Q&A Concerning China Compulsory Certification(CCC)
A ultimate guide to Canton Fair, Guangzhou, China
Introduction and Comparison of Major Chinese Express Companies
1.Q: When did the China Compulsory Certification(CCC) start to be implemented? A: China Compulsory Certification has come into effect on...
Canton Trade Fair Introduction Founded in the spring of 1957, the China Import and Export Fair (Namely Canton Fair, formerly known as...
There are mainly three types of express companies in China, one of which is the private express company which serves as the main body of...
A few days ago, the Wall Street Journal reported that the year 2012 witnessed a surprisingly large buyer in the global rice market: China. For decades, China’s continued growth in rice production makes Chinese exports of rice become far more than imports. However, at present, China’s record high import of rice from the global food […]
In the first half of the year 2012, the export growth of Chinese medical instruments is at a low run which is caused by the following factors combined together: the international market demand is not much; the world economic growth is lack of motivation; it is difficult for the recovery of the two largest economies […]
In December 6, 2012, Brazilian Foreign Trade Commission issued a proclamation. The proclamation decided to levy anti-dumping duties of 19.70 US dollars per kilogram on stainless steel tableware imported from China, and the tax calendar is five years. The mercosur tariff codes of the related products are 82111000, 82119100, 82152000 and 82159910. In December, […]
Documentation is one of the difficult parts of international trade, even for veteran importers and exporters. We often received emails from China Import Magazine readers, seeking help for documentation preparation, application and issuing. It takes a while to compile the complete list of documents formats related with China import and export. If there is anything […]
In 2012, China’s automobile exports have slowed down. After swift growth of 53.2 percent in 2010 and 52.2 percent in 2011, the growth of China’s automobile exports have slowed down in the first half of 2012 and the year to year growth was only 17.7 percent. According to the Customs Information Network (www.haiguan.info),China has exported […]
[Original] Why is it necessary to conduct the grounding resistance test? It is also known as grounding continuity test. The test should be conducted on all class I products. The purpose for the test is to ensure all conducting components of the product which can be touched by users and will turn to charged body […]
1. Input Test: Test the power, the rotating speed (RPM), voltage of motor, current of motor and air volume (L/S) at different gears. Check if the heating wires become red. 2. Insulation Withstand Voltage Test Cover the sample’s surface with metal leaf. Input the voltage of 3,750V between the metal leaf and the plug […]
1. Cover Strength Test Test method: Press the product at the position of air inlet and the air outlet vertically with a test finger whose diameter is 6.4mm*127mm. The force of the pressure should be 5 pounds and should last for one minute. Demand: During the test, the uninsulated electrified parts should not be touched […]
First, Cross- Cutting Testing Procedure: 1. To cut a 10X10MM coated surface (flat) into 100 grids with a sharp knife, with each grid occupying an area of 1 mm2 (make sure all the incisions should show the base material and the cuts should not be tilted) 2. To attach 3M adhesive tape to the cut […]
First, Coating Adhesion Cross- Cutting Test First of all, clean the surface of product for test with a piece of cotton cloth. Then cut a 10*10mmcoated surface (flat) into 100 grids with a sharp knife, with each grid occupying an area of1 mm*1mm(make sure all the incisions should show the base material and the cuts […]
